Home / News / Monitor Cable Manufacturers Explains How To Properly Install Cables

News

Monitor Cable Manufacturers Explains How To Properly Install Cables

 

With the wide application of electricity, people's demand for cables is increasing. When the demand is large, we will face the storage, laying and use of cables. Pay attention to these links and operate according to specific requirements to avoid hidden dangers of cable quality caused by external factors. Below, Monitor Cable Manufacturers introduces the following five points when laying and installing cables:

1. Before the cable is laid and installed, check whether the appearance and head of the cable are in good condition, and carry out the acceptance test according to the relevant standards. Construction can only be done after being qualified.

2. Cable laying and installation should be carried out by qualified units or professionals. Construction and installation that does not meet the requirements of construction specifications may cause the cable to not operate properly.

3. Violent collision and friction are strictly prohibited during cable laying. When laying, ensure that the surface of the cable is not damaged and the protective layer is intact.

4. The laying of wires and cables should be straight, not twisted, looped, squeezed or damaged by external force. When fixed, the tightness is moderate.