Home / News / Connection Cable Manufacturers Introduce The Precautions For Cable Use

News

Connection Cable Manufacturers Introduce The Precautions For Cable Use

With the widespread application of electricity in society, people's demand for cables is also increasing. While choosing cables of good quality, we should also pay attention to the storage, laying, and use of cable products. In order to avoid hidden dangers of cable quality caused by external factors, Connection Cable Manufacturers introduce the matters that should be paid attention to during the use of cables:

1. Before using the product, pay attention to checking the product qualification certificate to confirm whether the input voltage, output current, and power are in line with the requirements of the supporting products, and whether overload use is strictly prohibited;

2. The temperature of the wire and cable in use does not exceed the long-term allowable working temperature of the wire and cable standard;

3. Be careful not to connect the cables in the wrong phase when connecting;

4. The installation of cables under different circumstances should be completed in accordance with the corresponding regulations and operating procedures, including later maintenance and management;

5. When the cables are routed, it is recommended to place them in parallel with each other, and it is forbidden to cross and twist them together;

6. The twist radius of the cable should be greater than the curvature radius of the corresponding cable;

7. Any mechanical damage to the cable is prohibited, and people are also prohibited from walking on the cable;

8. When placing the cable, it is recommended not to place it directly on the ground, and try not to let the cable be immersed in water for a long time;

9. Pay attention to waterproofing at the connection of cables or plug-ins, and it is forbidden to clean any electrical equipment with water;

10. Check the cable's certificate before laying the cable. Its model, voltage, specification, and length should all meet the requirements. Different cables should not be replaced at will. At the same time, check the appearance of the cable for mechanical damage such as smashing and flattening, and aging phenomena such as cracking on the surface of the sheath;

11. Before connecting the cable, pay attention to check the insulation of the cable and the motor, but it is forbidden to test the insulation after the cable is connected to the inverter module;

12. It is forbidden to plug and unplug the plug-in while electrified.